3.Lift the door off the bottom hinge.
4.Remove bottom hinge from cabinet (2 screws) (see Figure 16). Remove screws on opposite side of cabinet (see Figure 17). Note that there may be a nut behind one or both screws on either side.
UL211
Figure 16
UL210
Figure 17
5.Install hinge on opposite side, bottom of cabinet (see Figure 18). Replace nut on back side where installed. Align hinge outer edge with cabinet before tightening screws.
UL212
Figure 18
6.Relocate plastic spacer/ bushing on bottom of door to opposite side, and place door on bottom hinge pin (see Figure 19). Clean out bushing hole in door bottom with a screwdriver if needed.
7.Remove plastic hole plug from door handle and relo- cate on opposite side.
BUSHING
UL113
Figure 19
15