7.

Holding door gasket out of the

 

way, replace handle on door

 

making sure it is seated prop-

 

erly on insert and that screw

 

holes line up.

8.

Install

two small screws

 

removed in step 3. Be careful

 

no to overtighten these screws.

 

This could strip the plastic.

9.

Starting at the center and

 

working

outward, push door

 

gasket into place on door.

UL117

Place door on bottom hinge pin

10.

Figure 25

and install upper hinge screw

(see Figure 23).

BUILT-IN INSTALLATION

Your U-Line product has been designed for either free-standing or builtin installation. When built-in, your U-Line product does not require additional air space for top, sides or rear. However, the front grille must NOT be obstructed.

!CAUTION

Do not install unit behind closed doors.

BUILT-IN CABINET DIMENSIONS

Model

 

Unit Dimensions

 

Width

Height

Depth

 

CLR 60

14-15/16"

34-35"

24"

 

 

 

 

NOTE

To ease unit installation and removal, increase the above measurements. It is recommended that the cabinet rough opening dimensions be increased by at least 1/4" over the dimensions given for your unit. The unit must be located to allow clearance for water, drain and electrical connections in the rear of the ice maker.

19