User’s Manual
! WARNING !
To prevent accidental electrocution, make certain that the floor surfaces surrounding the unit are dry whenever power is removed from, or applied to the unit.
1.Make certain the unit is not plugged into an electrical outlet.
2.Using a screwdriver, carefully push the power cord grommet through the hole in the back panel.
SCREWS
BACK
PANEL
DRAIN
FITTING
POWER
CORD
GROMMET
3.Using a screwdriver or 1/4" nut driver, remove 12 screws and back panel.
4.Check that the clamps and hose connections are tight at the fol- lowing areas:
•Discharge tube (A)
•Drain tube (B)
•Vent tube (C)
B B
C
A
BACK VIEW | SIDE VIEW |
|
6