Remove existing bottom hinge.

1.Remove the existing bottom hinge (three screws) (2).

Reinstall hinge to top opposite.

1.Install the hinge just removed from the bottom to the TOP opposite side of the cabinet (three screws) (2).

Reinstall Hole Plugs.

1.Install plastic screw plugs (three each, top and bottom) (3) into holes where hinge hardware was removed.

Install Door.

1.Hold door upright and tilted forward.

2.Lift door on to bottom hinge closer inserts.

3.Tilt door forward into position.

4.Hold door to keep it from falling.

5.Reinstall hinge screw pin (1) into top hinge using a Phillips screwdriver.

Align and adjust the door:

Align and adjust the door, see DOOR ALIGNMENT AND ADJUSTMENT on page 10.

14

u-line.com

Page 17
Image 17
U-Line 0 U-CLRCO2175B-40, U-CLR2160SOD-41, U-CLR2160SOD-01, U-CLRCO2175S-41, U-CLR2160W-00 manual Remove existing bottom hinge