Quick Start Guide | Ultra Electronics Card Systems |
G Interfacing to a RIO/TANGO Printer
IMPORTANT NOTE FOR SETTING UP YOUR RIO/TANGO PRINTER DRIVER TO WORK WITH THE SICURA LAMINATOR –
Please select the appropriate option in your printer driver for best results.
It is necessary to make the correct settings to the overcoat page in your printer driver when using a laminator.
If your printer is installed with a custom Holokote key, or you are using the standard UltraSecure logo you can select the UltraShield box under the Security Options. This selection uses selective overcoat application to give a 3D security logo effect.
If you are overlaminating with no additional security option, ensure the overcoat enabled box is not checked.
Page 14 | MAGICARD Sicura Laminator |
