9
Windows XP/Server 2003
For New Windows XP/Server 2003 Installation
1. Install the board and follow Microsoft procedures to
install Windows XP accordingly.
2. Restart your system when prompted during
Windows' installation.
3. At the Windows Setup screen, press F6 to install the
driver.
4. Insert the driver diskette. Press S then press Enter.
5. Select Silicon Image SiI 0680 ATA/133 Controller
and press Enter.
6. Press Enter to continue and follow on-screen
instructions to complete Windows XP installation.
7. When the Software Installation warning pops up,
click Yes. And when the Hardware Installation
warning pops up, click Yes again.
For Existing Windows XP/Server 2003 Installation
1. Install the board and boot up Windows XP.
2. At the Found New Hardware Wizard, insert the
driver diskette, select Install the software
automatically (Recommended), then click Next.
3. Click Finish, remove the driver diskette and restart
Windows to complete the installation.