6
Windows ME
For New Windows ME Installation
1. Install the board and follow Microsoft procedures to
install Windows ME accordingly.
2. Once Windows has been installed, right click My
Computer, then click Properties. Select Device
Manager tab.
3. Double click PCI Mass Storage Controller listed
under Other Devices.
4. Select Driver tab, then click Update Driver button.
5. Insert the driver diskette, select Automatic search
for a better driver (Recommended), then click Next.
6. Click Finish, remove the driver diskette and click
Yes to restart Windows to complete driver
installation.
For Existing Windows ME Installation
1. Install the board and boot up Windows ME.
2. At the Add New Hardware Wizard, insert the driver
diskette.
3. Select Automatic search for a better driver
(Recommended), then click Next.
4. Click Finish.
5. Remove the driver diskette and restart Windows to
complete driver installation.
To Verify Windows 98SE/ME Installation
1. Right-click My Computer, then click Properties.
Select Device Manager tab.
2. Double click SCSI Controllers, an entry, Silicon
Image SiI 0680 ATA/133 Controller should be listed.