Battery use time (per charge)
From fully charged
•6 hours continuous use.
•10 days when the handset is in the standby mode.
When the battery charge becomes low
When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, “Low Battery“ flashes and none of the keys will operate. If the phone is in use, “Low Battery“ flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.
The last number dialed in redial memory, back up for up to 2 minutes while you replace the battery pack.
Cleaning the charging contacts
To maintain a good charge, it is important to clean the battery contacts on the handset and base unit with a dry cloth or a pencil eraser about once a month.
Do not use any liquids or solvents.
•Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to
return the handset to the base unit after each telephone call.
•If you must replace the battery pack during a telephone call, complete the replacement of the battery pack within
30 seconds, and you can return to the original call.
G E T T I N G S TA R T E D [ 11 ]
GETTING STARTED
