Uniden 24-148 manual Selecting the message record time, Selecting a PIN code

Models: 24-148

1 64
Download 64 pages 30 b
Page 44
Image 44

Press and hold

or to quickly scroll through numbers on the display.

Selecting the message record time

You can set your answering system to record messages up to one or four minutes long.

One minute option: move the REC TIME switch to 1.

Four minutes option: move the REC TIME switch to 4.

Announce only feature: The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position. The message counter LED displays “ “ when the system is on standby. Prerecorded outgoing message for Announce only feature is:

For example: “Hello, no one is available to take your call.“ (twice)

Selecting a PIN code

To play your messages from a remote location, you will need to enter a two-digit Personal Identif ication Number (PIN) code (00-99). To select a PIN, perform the following steps.

1On the base, press and hold until a tone sounds and the LED displays .

2To set the f irst number, press or repeatedly to scroll from 0

to 9. When the desired number appears in the display, press .

3To set the second number, press or to scroll from 0 to 9.

When the desired number appears in the display, press . Then the entered PIN code is announced.

[ 42 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E

Page 44
Image 44
Uniden 24-148 manual Selecting the message record time, Selecting a PIN code