Uniden 24-148 manual Chain Dialing

If you select a memory location that does not have a stored number, the handset will beep rapidly and the phone will not dial.

Memory dialing from Talk Mode

1 Press . “Talk“ and the volume setting appear.

If you set the ringer to off, “<Ringer Off>“ appears on the display.

2 Press .

3Enter a two-digit number (01 - 20) to select the memory location of the desired phone number. The selected phone number is displayed. Then the number is dialed.

Talk 0:00

Talk 0:35 0123456789012

4 To hang up, press .

Chain Dialing

The 20 memory locations on the handset are not limited to phone numbers. You may want to store in memory a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.

An example of this is a bank account number. Once you have called your bank,

when you are prompted to enter the account number, simply press	and
then the location where the special number has been stored.
Store your special number with identifying name in memory as you would a
phone number (Refer to “ Storing Phone Numbers and Names“ on page 21).
Enter a pause as necessary in the sequence.

A pause counts as one digit and represents a two second delay in time between digits as they are sent.

[ 26 ] M E M O RY D I A L I N G