Remote access away from home
You can operate your answering system from a remote location using any touch- tone telephone. Use this function to check for recorded messages, to play or delete messages, to record a new outgoing message, and to monitor sounds in the room.
1Call your telephone number.
2While the greeting message is played, press # and your PIN code within 2 seconds.
If the answering system is off, let it ring 10 times. The tone sounds. Then, press # and your PIN code within 2 seconds.
3The answering system announces the time and day and the number of messages stored in memory. Then the message playback automatically begins.
4You may continue to listen to your message, or you may select a command from the following chart.
Command | Function |
#then 1 Repeat a message
#then 2 Playing your messages
#then 3 Skipping a message
#then 4 Deleting a message
#then 5 Stop message playback
#then 6 Answering system on
#then 7 Voice memo record/stop (up to 4 minutes recording time)
#then 8 Greeting message record/stop
#then 9 Answer system off
# then * | Room monitor |
5Af ter all of your messages have played, or the playback time exceeds 4 minutes, you will hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.
•During the remote
operation, 
displays on the base.
•You must enter a command within 15 seconds of entering command waiting mode. Otherwise the answering system automatically hangs up and returns to standby.
•The system will only playback messages for four minutes and then it returns to command waiting mode. To continue playing your message, press # then 2 again within 15 seconds.
T H E I N T E G R A T E A N S W E R I N G D E V I
T H E I N T E G R AT E D A N S W E R I N G D E V I C E [ 47 ]
D C E
