Using AC Power, Connecting the Antenna | Uniden BC95XLT specs

Using AC Power

You can power the scanner using the supplied 6V, 500 mA AC adapter.

To use the scanner on AC power, plug the AC adapter into DC 6V on the side of the scanner then plug the other end into a standard AC outlet.

If rechargeable batteries are installed and

REG. ALK. BATT./NI-MH BATT. is set to NI-MH BATT., the adapter powers the scanner and recharges the installed batteries at the same time.

Connecting the Antenna

To attach the supplied flexible antenna to the connector on the top of your scanner, align the slots around the antenna's connector with the tabs on the scanner's BNC connector. Then slide the antenna's connector down over the scanner's connector and rotate the antenna connector's outer ring clockwise until it locks into place.

Connecting an Optional Antenna

The scanner's BNC connector makes it easy to connect a variety of optional antennas, including an

Setting Up Your Scanner

23

Image 23

Uniden BC95XLT manual Using AC Power, Connecting the Antenna, Connecting an Optional Antenna

Contents

BC95XLT Precautions Precautions Precautions BC95XLT Controls and Display BC95XLT Controls and Display Contents Page FCC Wants You To Know FCC Wants You To KnowScanning Legally FCC Wants You To Know Introduction Introduction Frequency Range Step Mode Transmission MHz KHz Feature Highlights Feature Highlights Feature Highlights About This Manual Understanding Scanning What is Scanning?What is Searching? UnderstandingFeature HighlightsScanning Simplex Operation Conventional Scanning Information On The Internet Where To Obtain More InformationRepeater Operation For more information about Uniden and our other Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Using Non-Rechargeable Batteries Setting Up Your Scanner Using Rechargeable Batteries Setting Up Your Scanner Connecting an Optional Antenna Using AC PowerConnecting the Antenna Connecting an Extension Speaker Connecting an Earphone/Headphone Belt Clip Connecting to a PC About Your Scanner About Your Scanner Hold/ C Look At The Keypad Func + Pgm Look At The Display About Your Scanner Channel-Storage Banks Service BanksUnderstanding Banks Operation Turning On The Scanner Setting SquelchOperation Storing Known Frequencies Into Channels Searching For and Temporarily Storing Active Frequencies Service Search Scanning the Stored Channels Storing Frequencies into Channels During Service Search Manually Selecting a Channel Close CallTM RF Capture Technology Special FeaturesSpecial Features Setting the Close Call Options Special Features To Step Chain Search Using Close Call RF Capture Chain Search Hold Mode Chain Search Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Priority Locking Out Channels Using the Display Backlight Using Keylock Troubleshooting Troubleshooting Troubleshooting Resetting the Scanner General Use Care and MaintenanceCleaning Care and Maintenance Birdies Repairs Specifications Specifications Sensitivity 12dB Sinad 21.3 MHz Optional Accessories Optional Accessories One-Year Limited Warranty One-Year Limited Warranty One-Year Limited Warranty Page Page World Without Wires