Connecting an Earphone/Headphone | Uniden BC95XLT guide

external mobile antenna or outdoor base station antenna.

Note: Always use 50-ohm, RG-58, or RG-8, coaxial cable to connect an outdoor antenna. If the antenna is over 50 feet from the scanner, use RG-8 low-loss dielectric coaxial cable. You can get a BNC adapter at your local electronics store.

Connecting an Earphone/Headphone

Antenna BNC Connector

Headphone

Jack

Squelch Volume

BC95XLT

For private listening, you can plug a 1/8-inch (3.5

mm)mini-plug earphone or mono headphones (not supplied) into the headphone jack on top of your scanner. This automatically disconnects the internal speaker.

Connecting an Extension Speaker

In a noisy area, an optional extension speaker, positioned in the right place, might provide more comfortable listening. Plug the speaker cable's 1/8- inch (3.5-mm) mini-plug into your scanner's jack.

WARNING!

If you connect an external speaker to the scanner's headphone jack, never connect the audio output line to a power supply and ground. This might damage the scanner.

Setting Up Your Scanner

24

Image 24

Uniden BC95XLT manual Connecting an Earphone/Headphone, Connecting an Extension Speaker

Contents

BC95XLT Precautions Precautions Precautions BC95XLT Controls and Display BC95XLT Controls and Display Contents Page FCC Wants You To Know Scanning LegallyFCC Wants You To Know FCC Wants You To Know Introduction Introduction Frequency Range Step Mode Transmission MHz KHz Feature Highlights Feature Highlights Feature Highlights About This Manual What is Scanning? What is Searching?UnderstandingFeature HighlightsScanning Understanding Scanning Conventional Scanning Simplex Operation Where To Obtain More Information Repeater OperationInformation On The Internet For more information about Uniden and our other Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Using Internal BatteriesUsing Non-Rechargeable Batteries Setting Up Your Scanner Setting Up Your Scanner Using Rechargeable Batteries Setting Up Your Scanner Using AC Power Connecting the AntennaConnecting an Optional Antenna Connecting an Earphone/Headphone Connecting an Extension Speaker Connecting to a PC Belt Clip About Your Scanner About Your Scanner Look At The Keypad Hold/ C Func + Pgm Look At The Display About Your Scanner Service Banks Understanding BanksChannel-Storage Banks Turning On The Scanner Setting Squelch OperationStoring Known Frequencies Into Channels Operation Service Search Searching For and Temporarily Storing Active Frequencies Storing Frequencies into Channels During Service Search Scanning the Stored Channels Manually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features To Step Using Close Call RF Capture Chain Search Chain Search Mode Chain Search Hold Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Locking Out Channels Priority Using Keylock Using the Display Backlight Troubleshooting Troubleshooting Troubleshooting Resetting the Scanner Care and Maintenance CleaningCare and Maintenance General Use Repairs Birdies Specifications Specifications Sensitivity 12dB Sinad 21.3 MHz Optional Accessories Optional Accessories One-Year Limited Warranty One-Year Limited Warranty One-Year Limited Warranty Page Page World Without Wires