When you select the search bank, the lower limit and upper limit frequency assigned in the search bank alternate on the display.
To select another search bank, press Func + PSrc or Func + 
to increase the search bank number or Func + 
to decrease it. Hold down Func + 
or Func + 
for about 1 second to quickly move through the search bank numbers.
After choosing the search bank, follow these steps to set the lower limit and upper limit frequency.
1.Enter the lower limit frequency by using the 
keys.
2.Press E to select the lower limit frequency.
3.Enter the upper limit frequency by using the 
keys.
4.Press E to select the upper limit frequency.
Direct Entry Search
You can use direct entry search to search up or down from the currently displayed frequency.
1.If the scanner is scanning or searching, press Hold.
2.Enter the frequency you want to start from by using the number keys. (Press 
to enter a decimal point).
3.Press Func + 
or Func + 
. The scanner searches, starting from the frequency you entered in Step 2.
If you enter a frequency that is out of range, the scanner sounds an error tone and Error appears.
Press Func + 
to change the search direction downward or Func + 
to change the search
Special Features
44
