Belt Clip, Connecting to a PC | Uniden BC95XLT manual

The Belt Clip

Serial Port

Beneath Cover

Belt Clip

Remote

Mounting Screws

To make your scanner easier to carry when you are on the go, we provide a factory attached belt clip. Use a Phillips screwdriver to remove the mounting screws and the clip from the scanner if desired.

Connecting to a PC

You can connect your scanner to a PC using an optional serial cable and software available from www.uniden.com. Plug the small end of the cable into the BC95XLT serial port (see above). Plug the other end into your PC's serial port. If your PC has only USB ports, use the optional USB-1 cable (also available from www.uniden.com) to connect the scanner to your computer. See page 59 for cable details.

When the scanner is correctly connected to your PC, the software tells the scanner to go into pro- gramming mode displaying Prog on the LCD. The

icon flashes.

Then, only the key and the key are enabled.

Setting Up Your Scanner

25

Image 25

Uniden BC95XLT manual Belt Clip, Connecting to a PC

Contents

BC95XLT Precautions Precautions Precautions BC95XLT Controls and Display BC95XLT Controls and Display Contents Page Scanning Legally FCC Wants You To KnowFCC Wants You To Know FCC Wants You To Know Introduction Introduction Frequency Range Step Mode Transmission MHz KHz Feature Highlights Feature Highlights Feature Highlights About This Manual What is Searching? What is Scanning?UnderstandingFeature HighlightsScanning Understanding Scanning Simplex Operation Conventional Scanning Repeater Operation Where To Obtain More InformationInformation On The Internet For more information about Uniden and our other Included With Your Scanner Included With Your Scanner Using Internal Batteries Setting Up Your ScannerUsing Non-Rechargeable Batteries Setting Up Your Scanner Setting Up Your Scanner Using Rechargeable Batteries Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Optional Antenna Connecting an Extension Speaker Connecting an Earphone/Headphone Belt Clip Connecting to a PC About Your Scanner About Your Scanner Hold/ C Look At The Keypad Func + Pgm Look At The Display About Your Scanner Understanding Banks Service BanksChannel-Storage Banks Operation Turning On The Scanner Setting SquelchStoring Known Frequencies Into Channels Operation Searching For and Temporarily Storing Active Frequencies Service Search Scanning the Stored Channels Storing Frequencies into Channels During Service Search Manually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features To Step Chain Search Using Close Call RF Capture Chain Search Hold Mode Chain Search Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Priority Locking Out Channels Using the Display Backlight Using Keylock Troubleshooting Troubleshooting Troubleshooting Resetting the Scanner Cleaning Care and MaintenanceCare and Maintenance General Use Birdies Repairs Specifications Specifications Sensitivity 12dB Sinad 21.3 MHz Optional Accessories Optional Accessories One-Year Limited Warranty One-Year Limited Warranty One-Year Limited Warranty Page Page World Without Wires