Uniden BCT-10 manual Connecting the Power, Direct Connection

Connecting the Power

Direct Connection

WARNING: The BCT-10 is designed to operate only with 12V DC, negative ground power systems. Operation of the unit on other voltages or polarities will cause damage to the unit and may create a fire hazard.

The straight power cord provided with the unit has bare wires at one end, and a small connector at the other end.

1.Connect the positive wire to a 12V DC source in your vehicle’s fuse box.

2.Connect the other wire to ground.

OFF

HIGHWAY

SYSTEM

	MODE
	MUTE
ALARM	L/0
HOLD	STATE

Fuse

Box

12