Uniden BCT-10 manual Operating Instructions, Applying Power

Operating Instructions

Applying Power

1.Turn the OFF/VOLUME control counter clockwise to power on the scanner. Adjust the volume about 1/4 turn.

2.During power-on, a self-test is performed. Check the front control panel for proper operation.

3.All the LED’s on the front control panel light up and the numbers 1 through 9 count up on the LED display. An Alert tone is also sounded. This tells you that the scanner is working properly.

4.The currently selected state appears on the display. The BCT-10 always comes on with the last settings selected, and in the last mode of operation.

MUTE	SR	HP
DISPLAY	WX	LP

MUTE

HOLD 9

MUTE

HOLD TX

15