Uniden BCT-10 manual Windshield Mounting

Installation

Windshield Mounting

1.Find a good position for the BCT-10 on your windshield. Refer to the Helpful Tips on page 5 for some guidelines on mounting positions.

2. Put the metal	1	1.	Windshield
mounting		2.	Road Surface
bracket on		3.	Metal Mounting
the			Bracket
windshield to		4.	Metal Mounting
adjust it for
		2	Bracket

best position.

parallel to road

3 4

3.If necessary, adjust the metal mounting bracket so that when you slide the BCT-10 onto it, it is parallel to the road surface and fits flush against the windshield. Your BCT-10 should look like the example at the right once it is installed.

VOLUME

OFF

VOLUME

OFF

VOLUME

OFF

Caution: Do Not adjust the metal mounting bracket with the BCT-10 attached. Doing so can cause damage to the bracket and the unit.

9