Operating Instructions
If the BCT-10 stops on an undesired frequency, press the H key twice to force the unit to start scanning again before the end of that transmission.
BE CAREFUL!! When you are in the Hold mode, there will be no Alert tones or Warning light, even if you are on the Alert frequency.
REMEMBER!! When you apply power, the BCT-10 comes on to exactly the same service and in exactly the same mode as when last turned off. If you are monitoring an Alert frequency in the Hold mode when you turn the BCT-10 off, it will come back to that Alert frequency in Hold mode when you turn it back on. The Alert feature will be inactive. To restore the Alert feature, press the
Hkey.
Memory Backup
Your BCT-10 has a memory backup system that remembers your frequency selections and deletions when you turn off the unit. This memory lasts permanently without any external power to the unit.
Birdies
All radios are subject to receiving undesirable signals. If your scanner stops during Scan mode and no sound is heard, press the
Hkey twice to resume scanning.
