Uniden BCT-10 manual Scanning Highway Patrol Frequencies

Operating Instructions

Scanning Highway Patrol Frequencies

1.To scan highway patrol frequencies exclusively, press the M key repeatedly until HP is blinking in the LED display.

2.The HP LED lights up.

3.While scanning, the BCT-10 displays the state code for the state you selected. When the BCT-10 detects an active frequency, it displays HP in the LED. and stops for two seconds before it resumes scanning.

		HIGHWAY
		SYSTEM
ALARM		MUTE	MODE
HOLD		STATE	L/0
	MUTE		HP
	HOLD
	MUTE		HP
	HOLD
		MUTE	TX
		HOLD
		MUTE	HP
		HOLD

21