Panasonic DMC-FZ2PP Troubleshooting, The power does not turn on. 1-1 Are the battery and the AC

Others

Troubleshooting

1:The power does not turn on. 1-1: Are the battery and the AC

adaptor correctly connected? Check the connection.

1-2: Is the battery sufficiently charged? Use a battery that has been sufficiently charged.

2:As the power is turned on, it turns off immediately.

2:Is the battery charge insufficient to operate the camera? Charge the battery or replace it with charged one.

3:The lens and the Viewfinder are

fogged.

3:Has condensation occurred? Carrying the digital camera from a cold place to a warm place could cause condensation on the camera. Wait until condensation disappears.

4:The image cannot be recorded. 4-1: Is the Memory Card inside?

4-2: Is the mode dial correctly set? Check it.

4-3: There is no memory capacity left on the card. Before recording, delete some images.

5:The image is not displayed on the LCD monitor.

5:Is the the image displayed on the Viewfinder? Press the [DISPLAY] button to switch to LCD monitor display.

6:The LCD monitor/Viewfinder is

too bright or dark.

6:Adjust the brightness of the LCD monitor/Viewfinder.

7:Flash does not fire.

7:Is the flash closed? Press the

[ OPEN] button to open the flash.

8:The display or images on the

LCD monitor/Viewfinder are not focused.

8:Set the mode dial to the mode corresponding to the distance to the subject.

9:The image will not play back. 9-1: Is the Card inside?

9-2: There is no image in the Card.

9-3: The mode dial is not set to playback [ ].

10:The image is not displayed on

the television.

10-1: Is the camera correctly connected with the TV? Check it.

10-2: Set the TV to video input mode.

11:When connecting to a PC,

images cannot be transferred.

11-1: Check that the camera is correctly connected to the PC.

11-2: Is the camera correctly recognized by the PC?

12:The clock setting is reset.

12-1: If you do not use the camera for a long time, the clock setting may be reset. When the message

[PLEASE SET THE CLOCK] appears, set the clock again.

12-2: When you take a picture before setting the clock, [0:00 0. 0. 0] is recorded.

13:The camera chatters when it is

shaken.

13:This is the sound coming from the lens. When you turn the power [ON], the sound is stopped. This is not a malfunction.

14:Some pixels are inactive or always lit on the LCD monitor.

14:This is not a malfunction. These pixels do not affect the recorded images.

100