Inserting the Card

Preparation

Inserting the Card

3

OPEN

[Preparation]

Check that the power switch is set to [OFF] and the lens is retracted.

Close the flash. (P37)

[Inserting the card]

1Slide the lever in the direction of the arrow to open the Memory Card/ battery door.

2Insert the card with the label facing the front of the camera.

 

• Insert the card, pressing gently until it

2

locks in place. If the card will not insert

freely, it may be reversed. Do not force

the card.

• Do not touch the connection terminals on the back side of the card.

3 Close the Memory Card/battery door.

4

OPEN

22Insert the card with the label facing the front of the camera.

[Removing the card]

1Open the Memory Card/battery door.

2Press the card to release.

3Pull the card out.

4Close the Memory Card/battery door.

If the Memory Card/battery door cannot be completely closed, take the card out and insert it again.

If the card cannot be fully inserted, verify whether the direction of the card is correct.

We recommend that you use a Panasonic branded SD Memory Card. (Use only the genuine card)

If the card is not fully inserted, the card may be damaged.

15

Page 15
Image 15
Panasonic DMC-FZ2PP Inserting the Card, Insert the card with the label facing the front of the camera