Panasonic DMC-FZ2PP Inserting the Battery, Close the Memory Card/battery door

Preparation

Inserting the Battery

3

OPEN

2

3

OPEN

2

[Preparation]

•Check that the power switch is set to [OFF] and the lens is retracted.

•Close the flash. (P37)

[Inserting the battery]

1Slide the lever in the direction of the arrow to open the Memory Card/ battery door.

2Insert the charged battery all the way in, until it is locked.

3Close the Memory Card/battery door.

[Removing the battery]

1Open the Memory Card/battery door.

2Slide the lock 1 in the direction of the arrow to remove the battery.

3Close the Memory Card/battery door.

•If you will not be using the camera for a long time, remove the battery.

•When the fully charged battery is inserted in the camera for more than 1 hour, the clock setting is memorized by the camera for about 24 hours even after the battery is removed. (The time may be shorter if the battery is not charged sufficiently.)

When the clock setting is cancelled, please set the date/time again. (P28)

•When the card is being accessed, do not open the Memory Card/battery door.

•The battery supplied with this camera is exclusively designed for this camera. Do not use with any other equipment.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

12