Checking the Captured Picture (Review)

Recording images (basic)

Checking the Captured Picture (Review)

1 W 2 1,3,41After taking a picture, press the 4/ [REVIEW/SET] button.2Press the [ ] button.4Press the 4/[REVIEW/SET] button.Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background T

2 1,3,4

1

Manual backgroundREVIEW1X

EXIT 4X

DELETE

Manual backgroundREVIEW4X

1X

 

8X

 

DELETE

After taking a picture, when auto review (P82) is set to [1SEC.]/[3SEC.], the captured picture is displayed on the LCD monitor/Viewfinder for 1 or 3 seconds, but you can also check the picture by following the methods shown below.

1After taking a picture, press the 4/ [REVIEW/SET] button.

You can check the previous or following picture with 2/1.

The last captured picture is displayed

for about 5 seconds. If you rotate the

zoom lever towards [Manual background ], the captured picture is zoomed 4 times (A) and

8 times if you rotate it once again. You can also change the position with 3/

4/2/1.

ªErasing the captured picture during the review

2Press the [Manual background ] button.

3When the message [DELETE THIS PICTURE?] is displayed, press 2 to select [YES].

4Press the 4/[REVIEW/SET] button.

The picture is erased.

Once erased, pictures cannot be recovered.

Multi images or all images can be deleted. Read P70 to operate them.

3

Manual background DELETE SINGLE

DELETE THIS PICTURE?

YES NO

SELECT Manual background

SET Manual background MULTI/ALL Manual background

Press the shutter button halfway to cancel the review.

In motion image mode [Manual background ], review cannot be used.

32

Page 32
Image 32
Panasonic DMC-FZ2PP Checking the Captured Picture Review, 2 1,3,4, After taking a picture, press the 4/ REVIEW/SET button