![](/images/new-backgrounds/1121628/12162811x1.webp)
TRANSDUCER WIRING
On the rear of the unit, locate the terminal lugs extending out of the rear of the instrument. These terminals are used to connect the transducer wires.
When shipped from the factory, the transducer is wired with 3 female lugs attached. These lugs need to be inserted onto the male terminals located on the rear of the gauge.
The BLACK terminal is connected to the BLACK wire. The WHITE terminal may be connected to either the RED, BLUE, or WHITE wire. Connect the shield to the position marked “SHIELD”.
SHIELD
BLACK
RED, BLUE, OR WHITE
If you need these female lugs, contact your Uniden Marine dealer.
POWER CABLE WIRING
Because the
Another method for cable wiring is as follows:
4