3.Mark the outline of each slot on the hull. Mark the screw locations 1/8" from the bottom of each slot, and drill four holes 3/4" deep with a 9/64" drill. The slots in the bracket allow 5/8" of vertical adjustment which can be utilized to lower the transducer further into the water to achieve optimal performance.

4.Using the sheet metal screws provided, attach and tighten the bracket to the hull so that the transducer projects 1/8" below the underside of the hull. A marine sealant such as RTV should be applied to the threads of the screws to prevent water seepage into the transom. Align the transducer so that the rear is 1/16 to 1/8" lower than the forward point (bow). Tighten all bolts and screws.

5.Route the cable to the QT-206, being careful not to tear the cable jacket. Make sure the cable is separated from the ignition, tachometer, alternator, or other electrical wiring. Do not remove the connector or splice or shorten the cable, as this will void the transducer warranty.

Transducer Replacement/Identification Tag

On most transducers manufactured after 1987, the operating frequency and part number is attached to the cable or is printed on a mylar tag near the connector end. Do not remove this tag since it identifies the

transducer and will help you identify the operating frequency of the

transducer. The QT-206 operates at 200 kHz. (Incorrect frequency will cause your instrument to operate improperly.)

Transducer Wetting

Immediately before launching your vessel, thoroughly wipe the face of the transducer with a detergent type liquid soap. This reduces the amount of time required for the transducer to establish good contact with the water. If this procedure is not followed, it may take several days for the complete “wetting” to occur, resulting in reduced performance of the instrument.

Transducer Painting

If a vessel is kept in saltwater, especially in the southern U.S., marine growth can accumulate rapidly on the transducer face and seriously reduce performance. If fouling does occur, use a stiff brush or putty knife to remove this growth. Wet sanding of the fouled transducer face is permissible with #220 or finer grade of wet or dry emery paper. (Use plenty of water.) Coating transducers with anti-fouling paint is often necessary to achieve consistent performance. All anti-fouling paints

7

Page 8 Page 10
Page 9
Image 9
Uniden Clock manual Transducer Replacement/Identification Tag
Page 8 Page 10

Clock specifications

Uniden, a well-known name in the electronics industry, has expanded its product range to include a variety of advanced clock options designed for both functionality and style. The Uniden Clock stands out with its sleek design, user-friendly features, and innovative technologies, making it a popular choice for homes and offices alike.

One of the main features of the Uniden Clock is its large, easy-to-read display. The LED screen provides clear visibility, even in low-light conditions, ensuring that you can easily check the time at a glance. Many models offer adjustable brightness settings, allowing users to customize the display to their comfort level. Some clocks even include a dimming feature that automatically adjusts the brightness based on ambient light, which is perfect for nighttime use.

In terms of functionality, most Uniden Clocks come equipped with multiple alarm settings. This allows individuals to set different alarms for various needs, such as waking up in the morning, reminders for important tasks, or even alarms for medication schedules. The snooze feature is also a welcome addition, giving users extra minutes of rest before the alarm rings again.

Another impressive technology integrated into Uniden Clocks is the radio feature. Many models include built-in FM tuners, allowing users to listen to their favorite stations while getting ready in the morning or winding down in the evening. Some clocks even support Bluetooth connectivity, enabling users to stream music directly from their smartphones or other devices.

For those who prioritize smart technology, Uniden has also introduced models that can sync with smart home systems, providing voice control capabilities. This integration allows users to manage their alarms, check the weather, and even adjust settings with simple voice commands, adding an extra layer of convenience to their daily routines.

The Uniden Clock is also designed with enhanced durability and energy efficiency in mind. Many models are equipped with battery backup systems, ensuring that the clock continues to function even during power outages. Additionally, the use of energy-efficient technologies means that these clocks consume minimal power, making them an environmentally friendly choice.

In conclusion, the Uniden Clock combines stylish design with cutting-edge technology to meet the needs of modern users. With features like a clear display, customizable alarms, radio functionality, and smart home integration, it offers a comprehensive solution to time management while enhancing the aesthetics of any space. Whether for personal use or as a thoughtful gift, the Uniden Clock is an excellent addition to any home or office.
Top Page Image Contents