HDD4 Replacement Procedures, Installing the HDD

4.7 HDD4 Replacement Procedures

To install the HDD, follow the steps below and refer to Figure 4-11 to 4-13.

1. Set the HDD to the HDD Holder and secure them with the following screws.

• M3.0⋅4C

FLAT HEAD screw

⋅4

NOTE: When replacing the HDD holder with a new one, stick the HDD cushion to the HDD holder in place.

HDD holder

HDD cushion

2.Connect the HDD assembly to the connector on the system board. Lay the HDD assembly down into the slot.

3.Set the HDD cover and secure it with the following screw.

• M2.5⋅5B

FLAT HEAD screw

⋅1

TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)

[CONFIDENTIAL]

4-27