Toshiba S500M manual Replacement Procedures System board, Removing the System board

4 Replacement Procedures 4.19 System board

Removing the System board

To remove the system board, follow the steps below and refer to Figure 4-38 and 4-39.

1.Take out the RJ45 harness from the slot of the base assembly.

2.Peel off the insulator (SQUARE INSULATOR).

3.Remove the following screws securing the system board.

• M2.5⋅6C Tapping screw ⋅2

4. Remove the system board from the base assembly.

CAUTION: When removing the system board, lift up the right side of the system board first.

	Insulator
M2.5x6C Tapping	(SQUARE INSULATOR)
	M2.5x6C Tapping

RJ45 harness

System board

Figure 4-38 Removing the system board (1)

4-68 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)