
4 Replacement Procedures | 4.9 Optical disk drive |
Installing the Optical disk drive
To install the Optical disk drive, follow the steps below and refer to Figure
NOTE: When installing a new optical disk drive, set the ODD bezel to the optical disk drive while securing the latches.
Optical disk drive
ODD bezel
1.Set the ODD rear bracket to the optical disk drive and secure them with the following screws.
• M2.0⋅3C | BIND screw | ⋅2 |
2.Insert the optical disk drive assembly into the slot to connect it to the connector on the system board.
3.Turn over the computer and secure the optical disk drive assembly with the following screw.
• M2.5⋅5B | FLAT HEAD screw | ⋅1 |
[CONFIDENTIAL] | TECRA M11/Satellite Pro S500M Series Maintenance Manual |