Jack/3G/Express board/Microphone/3G card

4.17 Jack/3G/Express board/Microphone/3G card

4 Replacement Procedures

To remove the jack/3G/Express board/Microphone/3G card, follow the steps below and refer to Figure 4-33 to 4-35.

1.Disconnect the jack/3G/Express board FPC from the connector CN9530 on the system board.

2.Disconnect the speaker harness from the connector CN6150 on the jack/3G/Express board.

3.Remove the following screw securing the jack/3G/Express board.

• M2.5⋅6C

Tapping screw

⋅1

M2.5x6C Tapping

Jack/3G/Express board FPC

CN6150

Speaker harness

CN9530

TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL]

4-59