4 Replacement Procedures | 4.4 Memory module |
4.4Memory module
Removing the Memory module
To remove the memory module, confirm that the computer is shut down. Then follow the steps below and refer to Figure
CAUTION: When removing the memory module, make sure the computer is powered off. Removing a memory module with the power on might damage the module or the computer itself.
Do not touch the connectors on the memory module or on the computer. Dust and stains on the connectors may cause memory access problems.
Never press hard or bend the memory module.
1.Turn over the computer.
2.Loosen the screw fixing the memory module cover.
3.Remove the memory module cover.
Screw
Memory module cover
Figure 4-5 Removing the memory module cover
[CONFIDENTIAL] | TECRA M11/Satellite Pro S500M Series Maintenance Manual |