20 CPU/Fin/DC fan, Removing the CPU/Fin/DC fan

4.20 CPU/Fin/DC fan

4 Replacement Procedures

To remove the CPU/fin/DC fan, follow the steps below and refer to Figure 4-40 to 4-42.

1.Disconnect the fan harness from the connector CN3380 on the system board.

2.Remove the following screws and fin (with the DC fan).

• M2.0⋅4B

BIND screw

⋅8

NOTE: When removing the fin, be sure to remove the screws in the reverse order of the number marked on the fin.

3. Disconnect the DC-IN harness from the connector CN8800 on the system board.

TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL]

4-73