Tests and Diagnostics
3.16 Expansion Test
To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen.
Subtest 01 PCMCIA wraparound [It is not supported]
CAUTION: PCMCIA wraparound test is not supported for this model.
NOTE: To execute this subtest, the PC card wraparound connector is required.
This subtest checks the following signal line of the PC card slot:
Address line
REG#, CE#1, CE#2 line
Data line
Speaker line
Wait line
BSY#, BVD1 line
This subtest is executed in the following order:
Sub# | Address | Good | Bad | Contents |
|
|
|
|
|
01 | 00001 | nn | xx | Address line |
| 00001 | nn | xx | REG#, CE#1, CE#2 |
|
|
|
| nn=A0, 90, 80, 00 |
|
|
|
|
|
02 | 00002 | ww | rr | Data line |
|
|
|
| ww=write data, rr=read |
|
|
|
| data |
03 | 00003 | Speaker line | ||
|
|
|
|
|
04 | 00004 | 40,80 | xx | Wait line (40<xx<80) |
|
|
|
|
|
05 | 00005 | nn | xx | Other lines (BSY#, BVD1) |
|
|
|
| NN=21, 00 |
|
|
|
|
|
NOTE: Select the subtest number01, The following message will appear: Test slot number select (1:slot0, 2:slot1, 0:slot0&1)?
