4.19 System board | 4 Replacement Procedures |
5.Disconnect the RGB harness from the connector CN9511 on the system board.
6.Turn up the insulator (HNS HOLD RJ INSULATOR) and disconnect the RJ45 harness from the connector CN4050 on the system board.
7.Peel off the insulators (SQUARE INSULATOR) and disconnect the USB harness from the connector CN9510 on system board.
NOTE: Do not reuse the removed SQUARE INSULATOR. Be sure to use a new SQUARE INSULATOR.
8. Disconnect the 3G power harness from the connector CN9531 on the system board.
3G power harness |
|
|
|
|
|
RJ45 harness | |||||
(Connected to CN9531) |
|
| (Connected to CN4050) | ||
|
| ||||
USB harness |
|
|
|
|
|
(Connected to CN9510) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Insulator | ||
|
|
|
| (HNS HOLD RJ |
|
|
|
|
| INSULATOR) |
|
|
|
|
|
|
|
| RGB harness |
Insulator | |
(SQUARE INSULATOR) | (Connected to CN9511) |
Figure 4-39 Removing the system board (2)
TECRA M11/Satellite Pro S500M Series Maintenance Manual |
