Toshiba S500M manual Installing the Jack/3G/Express board/Microphone/3G card

4 Replacement Procedures 4.17 Jack/3G/Express board/Microphone/3G card

Installing the Jack/3G/Express board/Microphone/3G card

To install the jack/3G/Express board/microphone/3G card, follow the steps below and refer to Figure 4-33 to 4-35.

1.Insert the 3G card to the connector on the jack/3G/Express board slantwise.

2.Push down the 3G card and secure it with the following screws.

• M2.0⋅3C BIND screw ⋅2

3.Connect the microphone harness to the connector CN6070 on the jack/3G/Express board.

4.Connect the jack/3G/Express board FPC to the connector CN9630 on the jack/3G/Express board.

5.Set the jack/3G/Express board (with the microphone) to the base assembly.

NOTE: When replacing a jack/3G/Express board with a new one, stick the gasket on the jack/3G/Express board in place.

6.Set the microphone into the slot of the base assembly.

7.Connect the speaker harness to the connector CN6150 on the jack/3G/Express board.

8.Connect the jack/3G/Express board FPC to the connector CN9530 on the system board.

4-62 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)