4.20 CPU/Fin/DC fan

4 Replacement Procedures

Installing the CPU/fin/DC fan

To install the CPU/fin/DC fan, follow the steps below and refer to Figure 4-40 to 4-44.

1.Make sure that the cam of the CPU socket is in the unlock (OPEN) position.

2.Set the CPU to the correct position in the CPU socket. Make sure the position of the CPU (triangle mark) is correct to avoid damaging pins on the CPU.

NOTE: When replacing the CPU with a new one, stick the insulator (SQUARE INSULATOR) to the CPU in place.

3.Lock the CPU by rotating clockwise the cam on the CPU socket by 180 degrees with a flat-blade driver.

SQUARE INSULATOR

CPUMark

CPU socket

SQUARE INSULATOR

Figure 4-43 Installing the CPU

TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL]

4-77

Page 368
Image 368
Toshiba S500M manual Installing the CPU/fin/DC fan