Toshiba S500M manual Removing the Touch pad/Fingerprint sensor board

4 Replacement Procedures 4.22 Touch pad/Fingerprint sensor board

4.22 Touch pad/Fingerprint sensor board

Removing the Touch pad/Fingerprint sensor board

To remove the touch pad/fingerprint sensor board, follow the steps below and refer to Figure 4-46 to 4-50.

1.Peel off the acetate tapes.

2.Disconnect the FS board FFC and touch pad button FFC from the connectors CN3240 and CN9650 on the fingerprint sensor board.

3.Disconnect the dual button FFC from the connector on the touch pad.

NOTE: In models without a dual button, there is no dual button FFC.

FS board FFC Touch pad button FFC

Acetate tape

Acetate tape

Dual button FFC

CN3240

CN9650

Figure 4-46 Removing the touch pad (1)

4-84 「CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)