Toshiba S500M manual Installing the LCD unit

4 Replacement Procedures 4.23 LCD unit

Installing the LCD unit

To install the LCD unit, follow the steps below and refer to Figure 4-51 to 4-57.

1. Set the brake hinges to the LCD unit and secure them with the following screws.

• M2.0⋅3C BIND screw ⋅4

NOTE: When replacing the brake hinge R with a new one, stick the hinge cover to the brake hinge R in place.

2.Connect the LCD harness to the connector on the LCD unit and secure it with the pull tape.

3.Turn the brake hinge R 90 degrees.

4.Set the LCD unit on the LCD cover and secure them with the following screws.

• M2.5⋅5B FLAT HEAD screw ⋅4

NOTE: When securing the LCD unit and LCD cover, be sure to secure the screws in the order of the number on the Figure 4-55.

4-98 「CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)