4.23 LCD unit | 4 Replacement Procedures |
4.23 LCD unit
Removing the LCD unit
To remove the LCD unit, follow the steps below and refer to Figure
1. Peel off the insulators (SQUARE INSULATOR and HNS 3G INSULATOR).
NOTE: Do not reuse the removed SQUARE INSULATOR. Be sure to use a new SQUARE INSULATOR.
2.Release the 3G antenna cables from the guides and take them out from the hole of the cover assembly.
Hole
3G antenna cable
| HNS 3G |
SQUARE INSULATOR | INSULATOR |
|
Guide
Guide
Figure 4-51 Removing the LCD unit (1)
TECRA M11/Satellite Pro S500M Series Maintenance Manual | [CONFIDENTIAL] |
