Toshiba S500M manual Replacement Procedures System board

4 Replacement Procedures 4.19 System board

7.Set the system board into the base assembly in place and secure them with the following screws.

• M2.5⋅6C Tapping screw ⋅2

NOTE: When installing the system board to the base assembly, do not pinch the harnesses.

After instilling the system board, make sure that the WL SW knob moves properly.

Set the system board as shown in the figure below.

8.Stick the insulator (SQUARE INSULATOR) in place.

9.Arrange the RJ45 harness in place and set it into the slot of the base assembly.

4-72 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)