4.5 Fin cover

4 Replacement Procedures

4.5Fin cover

NOTE: When repairing the PC, turn up the plastic film and clean the cooling fin with a vacuum cleaner or other cleaning tool.

Plastic film

Do not use cotton sticks and tweezers to remove dusts. It may cause the cooling module problem or dusts stuffed.

Removing the Fin cover

To remove the fin cover, follow the steps below and refer to Figure 4-7.

1.Using a thin-tipped tool, push on the hole in the edge of the Fin cover and remove the fin cover while sliding it in the direction in the figure below.

Fin cover

Hook

Hole

Figure 4-7 Removing the fin cover

TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)

[CONFIDENTIAL]

4-19

Page 310
Image 310
Toshiba S500M manual Removing the Fin cover