4.20 CPU/Fin/DC fan | 4 Replacement Procedures |
10. Set the fin (with the DC fan) in place and secure it with the following screws.
• M2.0⋅4B | BIND screw | ⋅8 |
NOTE: When securing the fin, be sure to secure the screws in the order of the number marked on the fin.
In models without a VGA, make sure that the gum sheet VGA is set on the system board in place.
11. Connect the fan harness to the connector CN3380 on the system board.
TECRA M11/Satellite Pro S500M Series Maintenance Manual |
