4.23 LCD unit | 4 Replacement Procedures |
8.Peel off the acetate tape.
9.Release the harnesses.
10.Turn the brake hinge 90 degrees.
11.Remove the following screws and stand the LCD unit.
Be careful that the LCD harness is connected to the connector on the back of the LCD unit.
• M2.5⋅5B FLAT HEAD screw ⋅4
LCD unit | M2.5x5B FLAT HEAD | |
| ||
|
|
|
| Acetate tape | Brake hinge R |
M2.5x5B FLAT HEAD |
| |
|
| |
M2.5x5B FLAT HEAD
Figure 4-55 Removing the LCD unit (4)
TECRA M11/Satellite Pro S500M Series Maintenance Manual | [CONFIDENTIAL] |
