Toshiba S500M manual Replacement Procedures 18 RGB/USB board, Removing the RGB/USB board

4 Replacement Procedures 4.18 RGB/USB board

4.18 RGB/USB board

Removing the RGB/USB board

To remove the RGB/USB board, follow the steps below and refer to Figure 4-36 and 4-37.

1.Disconnect the RGB harness from the connector CN9611 on the RGB/USB board.

2.Remove the following screw securing the RGB/USB board.

• M2.5⋅6C Tapping screw ⋅1

M2.5x6C Tapping

RGB harness

CN9611

Figure 4-36 Removing the RGB/USB board (1)

4-64 [CONFIDENTIAL] TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)