4.19 System board | 4 Replacement Procedures |
4.19 System board
CAUTION: When replacing with a new system board, the following procedures must be executed.
(1)Before replacing the system board, execute subtest02 “DMI information save” in 3.3 Setting of the hardware configuration of Chapter 3 Test program in order to save the DMI information from system board to floppy disk.
(2)After replacing the system board, execute the subtest03 “DMI information recovery” and subtest01 “Entry of the DMI information” in order to copy the DMI information and system configuration information.
(3)Also update the BIOS and EC/KBC with the latest ones according to the steps described in Appendix G and Appendix H.
Do not handle the area A, B and C of the system board.
Handling is prohibition.
TECRA M11/Satellite Pro S500M Series Maintenance Manual |
