
Tests and Diagnostics
| If the CPU supports Gerserville (SpeedStep), this Subtest checks that the CPU | |
| operating clock speed can be changed. | |
| If the CPU does not support Gerserville (SpeedStep), the following message is | |
| displayed and the test is ended. | |
| This chip is not supported | |
Subtest 04 | Quick Charge |
|
| This subtest checks the status for the quick charge. | |
Subtest 05 | DMI read |
|
| This subtest displays the information in the | |
| format. |
|
| *** DMI Data Display Ver X.XX *** | |
| Model Name | : XXXXXXXXXXX |
| Version Number | : XXXXXXXXXXXX |
| Serial Number | : XXXXXXXX |
| UUID Number | : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX |
| Model Number | : |
| PCN/BND Number | : XXXXXXXXXX |
Press [Enter] to EXIT
To exit this subtest and return to the SYSTEM test menu, press
Enter.Memory Test
To execute the Memory Test, select 2 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter.
Subtest 01 Conventional memory
This subtest writes a constant data to conventional memory (0 to 640 KB), then reads the new data and compares the result with the original data.
Subtest 02 Protected Mode
NOTE: The CONFIG.SYS file must be configured without expanded memory manager programs such as EMM386.EXE, EMM386.SYS or QEMM386.SYS. Also, the HIMEM.SYS must be deleted from the CONFIG.SYS file.
This subtest writes constant data and address data (from 1MB to maximum MB), and reads the new data and compares the result with the original data.
Subtest 03 Cache memory (on/off)
TECRA M11/Satellite Pro S500M Series Maintenance Manual |