4.10 SW board | 4 Replacement Procedures |
4.10 SW board
Removing the SW board
To remove the SW board, follow the steps below and refer to Figure
1.Turn up the insulator (LCD CONN INSULATOR) and disconnect the SW board FFC from the connector CN9500 on the system board.
2.Push down the hook and slide the SW board in the direction as shown in the figure below to remove it.
SW board
Guide
Hook
Insulator
(LCD CONN INSULATOR)
SW board FFC
CN9500
Figure 4-20 Removing the SW board
TECRA M11/Satellite Pro S500M Series Maintenance Manual | [CONFIDENTIAL] |
