4.12 Cover assembly and Base assembly | 4 Replacement Procedures |
4.Turn over the computer and open the display.
5.Turn up the insulator (LCD CONN INSULATOR) and disconnect the LCD harness from the connector CN5300 on the system board.
6.Disconnect the FS board FFC and camera harness from the connector CN9550 and CN9540 on the system board.
Insulator
(LCD CONN INSULATOR)Camera harness (Connected to CN9540)
LCD harness (Connected to CN5300)
FS board FFC (Connected to CN9550)
Figure 4-24 Removing the cover assembly and base assembly (3)
TECRA M11/Satellite Pro S500M Series Maintenance Manual |
