Tests and Diagnostics

3.34.6.2HDD Logical Test

1) Test content

This test first verifies that the files which exist on the drive recognized as the built-in HDD are read normally.

During the verification operation, the status update is performed sequentially (display of file names in File Name) and when the verification reaches the last file, it is terminated.

Simple Mode

This test mode performs the read test to the first 400 files on the drive.

■Detail Mode

This test mode performs the read test to first 2000 files on the drive.

2) Test screen

File Name: Displays the name of the file being verified with full path.

3) Result judgment

Both of PASS and FAIL are not displayed anywhere on the HDDL screen. The result is reflected to the log on the WinPE T&D screen.

In the case of PASS

The result is displayed as (OK) in the Result field on the WinPE T&D screen.

In the case of FAIL

The result is displayed as (NG) in the Result field on the WinPE T&D screen.

The file name of the file in which an error occurred is printed to the log of WinPE T&D. (The following example indicates the case where an error was found in file A .)

Name of file being verified

[HDDL]

ERROR0000=(2008/09/10, 12:00:00) C:¥file-A

TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL]

3-119

Page 228
Image 228
Toshiba S500M manual HDD Logical Test, Hddl