4.8 Keyboard

4 Replacement Procedures

Installing the Keyboard

To install the keyboard, follow the steps below and refer to Figure 4-14 to 4-16.

1.Place the keyboard face down on the palm rest and connect the keyboard flexible cable to the connector CN3230 on the system board.

2.Turn the keyboard face up and set it in place. Extra portion of the keyboard cable must be put under the cover assembly.

3.Secure the keyboard with the following screws.

• M2.0⋅3C

BIND screw

⋅2

4. Set the KB holder and press to secure the latches.

TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)

[CONFIDENTIAL]

4-31

Page 322
Image 322
Toshiba S500M manual Installing the Keyboard